7.5.13.1 Port 使用指南

基本概述

Port 子系统是 MCU 上对 PIN 的功能和属性进行配置的子系统。

Port_Func 模块 PIN 号对应的 PIN 名称列表

下表中各列含义如下：

• PIN 序号：Port 子模块中使用的 PIN 序号；
• PIN Name：PIN 的命名；
• GPIO 编号：用于获取 GPIO 控制器地址偏移及 GPIO 控制器寄存器偏移的编号；

PIN 序号	PIN Name	GPIO 编号
0	FUSA_ERR0	GPIO_MCU[0]
1	FUSA_ERR1	GPIO_MCU[1]
2	PPS_INOUT	GPIO_MCU[2]
3	LIN1_TXD	GPIO_MCU[3]
4	LIN2_TXD	GPIO_MCU[4]
5	CAN0_TX	GPIO_MCU[5]
6	CAN1_TX	GPIO_MCU[6]
7	CAN2_TX	GPIO_MCU[7]
8	CAN3_TX	GPIO_MCU[8]
9	CAN4_TX	GPIO_MCU[9]
10	CAN5_TX	GPIO_MCU[10]
11	CAN6_TX	GPIO_MCU[11]
12	CAN7_TX	GPIO_MCU[12]
13	CAN8_TX	GPIO_MCU[13]
14	CAN9_TX	GPIO_MCU[14]
15	SPI2_CSN1	GPIO_MCU[15]
16	SPI2_CSN0	GPIO_MCU[16]
17	SPI2_MOSI	GPIO_MCU[17]
18	SPI2_MISO	GPIO_MCU[18]
19	SPI2_SCLK	GPIO_MCU[19]
20	SPI3_CSN0	GPIO_MCU[20]
21	SPI3_CSN1	GPIO_MCU[21]
22	SPI3_MOSI	GPIO_MCU[22]
23	SPI3_MISO	GPIO_MCU[23]
24	SPI3_SCLK	GPIO_MCU[24]
25	SPI4_CSN0	GPIO_MCU[25]
26	SPI4_CSN1	GPIO_MCU[26]
27	SPI4_MOSI	GPIO_MCU[27]
28	SPI4_MISO	GPIO_MCU[28]
29	SPI4_SCLK	GPIO_MCU[29]
30	SPI5_CSN0	GPIO_MCU[30]
31	SPI5_CSN1	GPIO_MCU[31]
32	SPI5_MOSI	GPIO_MCU[32]
33	SPI5_MISO	GPIO_MCU[33]
34	SPI5_SCLK	GPIO_MCU[34]
35	SPI6_CSN0	GPIO_MCU[35]
36	SPI6_CSN1	GPIO_MCU[36]
37	SPI6_MOSI	GPIO_MCU[37]
38	SPI6_MISO	GPIO_MCU[38]
39	SPI6_SCLK	GPIO_MCU[39]
40	XSPI_MOSI_IO0	GPIO_MCU[40]
41	XSPI_MISO_IO1	GPIO_MCU[41]
42	XSPI_WP_IO2	GPIO_MCU[42]
43	XSPI_HOLD_IO3	GPIO_MCU[43]
44	XSPI_OCT_IO4	GPIO_MCU[44]
45	XSPI_OCT_IO5	GPIO_MCU[45]
46	XSPI_OCT_IO6	GPIO_MCU[46]
47	XSPI_OCT_IO7	GPIO_MCU[47]
48	XSPI_SCLK	GPIO_MCU[48]
49	XSPI_SCLK_INV	GPIO_MCU[49]
50	XSPI_DQS	GPIO_MCU[50]
51	EMAC_TX_CLK	GPIO_MCU[51]
52	EMAC_TX_EN	GPIO_MCU[52]
53	EMAC_TX_D3	GPIO_MCU[53]
54	EMAC_TX_D2	GPIO_MCU[54]
55	EMAC_TX_D1	GPIO_MCU[55]
56	EMAC_TX_D0	GPIO_MCU[56]
57	EMAC_RX_CLK	GPIO_MCU[57]
58	EMAC_RX_DV	GPIO_MCU[58]
59	EMAC_RX_D3	GPIO_MCU[59]
60	EMAC_RX_D2	GPIO_MCU[60]
61	EMAC_RX_D1	GPIO_MCU[61]
62	EMAC_RX_D0	GPIO_MCU[62]
63	XSPI_CSN	GPIO_MCU[63]
64	XSPI_RST_N	GPIO_MCU[64]
65	XSPI_ECC_FAIL	GPIO_MCU[65]
66	XSPI_HYP_INT	GPIO_MCU[66]
67	BIFSPI_CSN	GPIO_MCU[67]
68	BIFSPI_SCLK	GPIO_MCU[68]
69	BIFSPI_MOSI	GPIO_MCU[69]
70	BIFSPI_MISO	GPIO_MCU[70]
71	PMIC_ERR0	GPIO_MCU[71]
72	JTG_TCK	GPIO_MCU[72]
73	JTG_TRSTN	GPIO_MCU[73]
74	JTG_TMS	GPIO_MCU[74]
75	JTG_TDI	GPIO_MCU[75]
76	JTG_TDO	GPIO_MCU[76]
77	EMAC_MDC	GPIO_MCU[77]
78	EMAC_MDIO	GPIO_MCU[78]
79	Reserved	N/A
80	I2C6_SCL	GPIO_MCU[79]
81	I2C6_SDA	GPIO_MCU[80]
82	I2C7_SCL	GPIO_MCU[81]
83	I2C7_SDA	GPIO_MCU[82]
84	I2C8_SCL	GPIO_MCU[83]
85	I2C8_SDA	GPIO_MCU[84]
86	PWM0_IO	GPIO_MCU[85]
87	PWM1_IO	GPIO_MCU[86]
88	CAN0_RX	GPIO_AON[0]
89	CAN1_RX	GPIO_AON[1]
90	CAN2_RX	GPIO_AON[2]
91	CAN3_RX	GPIO_AON[3]
92	CAN4_RX	GPIO_AON[4]
93	CAN5_RX	GPIO_AON[5]
94	CAN6_RX	GPIO_AON[6]
95	CAN7_RX	GPIO_AON[7]
96	CAN8_RX	GPIO_AON[8]
97	CAN9_RX	GPIO_AON[9]
98	LIN1_RXD	GPIO_AON[10]
99	LIN2_RXD	GPIO_AON[11]
100	Reserved	N/A
101	Reserved	N/A
102	Reserved	N/A
103	Reserved	N/A
104	Reserved	N/A
105	WAKEUP_IO	GPIO_AON[12]

PIN 序号	PIN Name	GPIO 编号
0	PPS_IN0	GPIO_MCU[0]
1	PPS_OUT	GPIO_MCU[1]
2	PPS_IN1	GPIO_MCU[2]
3	VALEO_USS_DATA_F0_EN	GPIO_MCU[3]
4	CAN1_TX	GPIO_MCU[4]
5	CAN2_TX	GPIO_MCU[5]
6	CAN3_TX	GPIO_MCU[6]
7	CAN4_TX	GPIO_MCU[7]
8	CAN5_TX	GPIO_MCU[8]
9	CAN6_TX	GPIO_MCU[9]
10	CAN7_TX	GPIO_MCU[10]
11	UART8_TX	GPIO_MCU[11]
12	VALEO_USS_DATA_F2_EN	GPIO_MCU[12]
13	CAN_1042_STB	GPIO_MCU[13]
14	UART11_TX	GPIO_MCU[14]
15	CAN10_TX	GPIO_MCU[15]
16	VALEO_USS_DATA_R5_EN	GPIO_MCU[16]
17	VALEO_USS_DATA_R2_EN	GPIO_MCU[17]
18	POC_BOOST_PWR_EN	GPIO_MCU[18]
19	USS_PWM4	GPIO_MCU[19]
20	VALEO_USS_DATA_R3_EN	GPIO_MCU[20]
21	SPI13_MISO	GPIO_MCU[21]
22	SPI13_SCLK	GPIO_MCU[22]
23	VALEO_USS_DATA_F3_EN	GPIO_MCU[23]
24	MCU_PERI_PWR	GPIO_MCU[24]
25	CAN5_STB	GPIO_MCU[25]
26	VALEO_USS_NINT	GPIO_MCU[26]
27	CAN8_TX	GPIO_MCU[27]
28	CAN9_TX	GPIO_MCU[28]
29	SPI6_CSN0	GPIO_MCU[29]
30	SPI6_MOSI	GPIO_MCU[30]
31	SPI6_MISO	GPIO_MCU[31]
32	SPI6_SCLK	GPIO_MCU[32]
33	VALEO_USS_SPI_SDI	GPIO_MCU[33]
34	VALEO_USS_SPI_CSN	GPIO_MCU[34]
35	VALEO_USS_SPI_SCLK	GPIO_MCU[35]
36	VALEO_USS_SPI_SDO	GPIO_MCU[36]
37	SPI13_CSN1	GPIO_MCU[37]
38	SPI13_CSN0	GPIO_MCU[38]
39	SPI13_MOSI	GPIO_MCU[39]
40	MCU_GPS_RESET	GPIO_MCU[40]
41	SPI4_CSN0	GPIO_MCU[41]
42	SPI4_CSN1	GPIO_MCU[42]
43	SPI4_MOSI	GPIO_MCU[43]
44	SPI4_MISO	GPIO_MCU[44]
45	SPI4_SCLK	GPIO_MCU[45]
46	HSM_UART_RXD	GPIO_MCU[46]
47	HSM_UART_TXD	GPIO_MCU[47]
48	BYPASS_MUX_EN	GPIO_MCU[48]
49	MCU_EXIO_RST	GPIO_MCU[49]
50	DES4_POC_EN	GPIO_MCU[50]
51	PWM3_IO	GPIO_MCU[51]
52	BY_ADAS_DES_PWR_EN	GPIO_MCU[52]
53	ADAS_DES_PWR_EN	GPIO_MCU[53]
54	PMIC_ERR7	GPIO_MCU[54]
55	PMIC_ERR8	GPIO_MCU[55]
56	PMIC_ERR9	GPIO_MCU[56]
57	LEDPWR_EN	GPIO_MCU[57]
58	PMIC_ERR0	GPIO_MCU[58]
59	PMIC_ERR1	GPIO_MCU[59]
60	PMIC_ERR2	GPIO_MCU[60]
61	PMIC_ERR3	GPIO_MCU[61]
62	PMIC_ERR4	GPIO_MCU[62]
63	SYS_MONO_INT	GPIO_MCU[63]
64	EXT_MON_INT	GPIO_MCU[64]
65	I2C10_SCL	GPIO_MCU[65]
66	I2C10_SDA	GPIO_MCU[66]
67	MCU_EXIO_INT	GPIO_MCU[67]
68	TMP_ALERT	GPIO_MCU[68]
69	I2C12_SCL	GPIO_MCU[69]
70	I2C12_SDA	GPIO_MCU[70]
71	I2C13_SCL	GPIO_MCU[71]
72	I2C13_SDA	GPIO_MCU[72]
73	I2C14_SCL	GPIO_MCU[73]
74	I2C14_SDA	GPIO_MCU[74]
75	XSPI_CSN	GPIO_MCU[75]
76	XSPI_RST_N	GPIO_MCU[76]
77	XSPI_ECC_FAIL	GPIO_MCU[77]
78	DDR_PWROK	GPIO_MCU[78]
79	EMAC_MDC	GPIO_MCU[79]
80	EMAC_MDIO	GPIO_MCU[80]
81	Reserved	N/A
82	EMAC2_TX_CLK	GPIO_MCU[82]
83	EMAC2_TX_EN	GPIO_MCU[83]
84	EMAC2_TX_D3	GPIO_MCU[84]
85	EMAC2_TX_D2	GPIO_MCU[85]
86	EMAC2_TX_D1	GPIO_MCU[86]
87	EMAC2_TX_D0	GPIO_MCU[87]
88	EMAC2_RX_CLK	GPIO_MCU[88]
89	EMAC2_RX_DV	GPIO_MCU[89]
90	EMAC2_RX_D3	GPIO_MCU[90]
91	EMAC2_RX_D2	GPIO_MCU[91]
92	EMAC2_RX_D1	GPIO_MCU[92]
93	EMAC2_RX_D0	GPIO_MCU[93]
94	XSPI_SCLK	GPIO_MCU[94]
95	XSPI_SCLK_INV	GPIO_MCU[95]
96	XSPI_DQS	GPIO_MCU[96]
97	XSPI_MOSI_IO0	GPIO_MCU[97]
98	XSPI_MISO_IO1	GPIO_MCU[98]
99	XSPI_WP_IO2	GPIO_MCU[99]
100	XSPI_HOLD_IO3	GPIO_MCU[100]
101	XSPI_OCT_IO4	GPIO_MCU[101]
102	XSPI_OCT_IO5	GPIO_MCU[102]
103	XSPI_OCT_IO6	GPIO_MCU[103]
104	XSPI_OCT_IO7	GPIO_MCU[104]
105	WAKE_INH	GPIO_AON[0]
106	IMUPWR_EN	GPIO_AON[1]
107	MCU_PWR_KEEPIO	GPIO_AON[2]
108	MCUPWR_VR5510_INT	GPIO_AON[3]
109	EFUSE_PWR_EN	GPIO_AON[4]
110	CAN8_RX	GPIO_AON[5]
111	CAN9_RX	GPIO_AON[6]
112	CAN10_RX	GPIO_AON[7]
113	SPI8_CSN1	GPIO_AON[8]
114	MAIN_PWR_EN_M	GPIO_AON[9]
115	MAIN_PRE_PWR_EN_M	GPIO_AON[10]
116	DRAM_PWR_EN_M	GPIO_AON[11]
117	MAIN_DRAM_PRE_PWR_EN_M	GPIO_AON[12]
118	SPI8_CSN0	GPIO_AON[13]
119	SPI8_SCLK	GPIO_AON[14]
120	SPI8_MOSI	GPIO_AON[15]
121	SPI8_MISO	GPIO_AON[16]
122	VALEO_USS_PWR_CH_EN	GPIO_AON[17]
123	USSPWR_EN	GPIO_AON[18]
124	GPSPWR_EN	GPIO_AON[19]
125	UART11_RX	GPIO_AON[20]
126	Reserved	N/A
127	Reserved	N/A
128	Reserved	N/A
129	Reserved	N/A
130	UART8_RX	GPIO_AON[25]
131	CAN1_RX	GPIO_AON[26]
132	CAN2_RX	GPIO_AON[27]
133	CAN3_RX	GPIO_AON[28]
134	Reserved	N/A
135	Reserved	N/A
136	Reserved	N/A
137	Reserved	N/A
138	Reserved	N/A
139	Reserved	N/A
140	Reserved	N/A
141	CAN4_RX	GPIO_AON[36]
142	CAN5_RX	GPIO_AON[37]
143	CAN6_RX	GPIO_AON[38]
144	CAN7_RX	GPIO_AON[39]
145	FUSA_ERR0	GPIO_AON[40]
146	FUSA_ERR1	GPIO_AON[41]

Port_Func 模块

Port_Func 模块是地瓜提供的针对功能模块对该功能模块下属所有 PIN 进行初始化配置/操作 GPIO 的模块。

Port_Func 模块配置 PIN 功能使用示例

代码示例

使用示例可以参考samples/Spi/SPI_sample/Spi_sample.c，基本使用逻辑为：

...
#include <Port_Func.h>

...

	/* Configure Pin for SPI5 */
	Port_SetFunctionPins(PORT_FUNC_SPI5);

...

Port_Func 模块提供的外设配置

地瓜提供的默认外设 PIN 配置被记录在：McalCdd/Port/inc/Port_Func.h文件内，通过一个由 enum 类型定义记录：

...

typedef enum PinFunctions {
    PORT_FUNC_UART4,
    PORT_FUNC_UART5,
    PORT_FUNC_UART6,
    PORT_FUNC_SPI2,
    PORT_FUNC_SPI3,
    PORT_FUNC_SPI4,
    PORT_FUNC_SPI5,
    PORT_FUNC_SPI6,
    PORT_FUNC_SPI7,
    PORT_FUNC_CAN0,
    PORT_FUNC_CAN1,
    PORT_FUNC_CAN2,
    PORT_FUNC_CAN3,
    PORT_FUNC_CAN4,
    PORT_FUNC_CAN5,
    PORT_FUNC_CAN6,
    PORT_FUNC_CAN7,
    PORT_FUNC_CAN8,
    PORT_FUNC_CAN9,
    PORT_FUNC_I2C6,
    PORT_FUNC_I2C7,
    PORT_FUNC_I2C8,
    PORT_FUNC_I2C9,
    PORT_FUNC_PWM0,
    PORT_FUNC_PWM1,
    PORT_FUNC_PWM2,
    PORT_FUNC_PWM3,
    PORT_FUNC_PWM4,
    PORT_FUNC_PWM5,
    PORT_FUNC_PWM6,
    PORT_FUNC_PWM7,
    PORT_FUNC_PWM8,
    PORT_FUNC_PWM9,
    PORT_FUNC_PWM10,
    PORT_FUNC_PWM11,
    PORT_FUNC_PPS_IN0,
    PORT_FUNC_PPS_IN1,
    PORT_FUNC_PPS_IN2,
    PORT_FUNC_PPS_OUT,
    PORT_FUNC_EMAC,
    PORT_FUNC_MAX,
} PinFunc_e;

...

typedef enum PinFunctions {
    /* uart8 - uart11*/
    PORT_FUNC_UART8,
    PORT_FUNC_UART9,
    PORT_FUNC_UART10,
    PORT_FUNC_UART11,
    /* spi4 - spi13*/
    PORT_FUNC_SPI4,
    PORT_FUNC_SPI5,
    PORT_FUNC_SPI6,
    PORT_FUNC_SPI7,
    PORT_FUNC_SPI8,
    PORT_FUNC_SPI9,
    PORT_FUNC_SPI10,
    PORT_FUNC_SPI11,
    PORT_FUNC_SPI12,
    PORT_FUNC_SPI13,
    /* can0 - can15*/
    PORT_FUNC_CAN0,
    ...
    PORT_FUNC_CAN15,
    /* i2c10 - i2c14*/
    PORT_FUNC_I2C10,
    PORT_FUNC_I2C11,
    PORT_FUNC_I2C12,
    PORT_FUNC_I2C13,
    PORT_FUNC_I2C14,
    /* pwm0 - pwm31*/
    PORT_FUNC_PWM0,
    ...
    PORT_FUNC_PWM31,
    /* PPS_IN0 - PPS_OUT */
    PORT_FUNC_PPS_IN0,
    PORT_FUNC_PPS_IN1,
    PORT_FUNC_PPS_IN2,
    PORT_FUNC_PPS_OUT,
    PORT_FUNC_EMAC,
    PORT_FUNC_MAX,
} PinFunc_e;

Port_Func 操作 GPIO 使用示例

Port_Func 提供的 GPIO 接口，使用的 PinIdx 为Port_Func模块PIN号对应的PIN名称列表

代码示例

使用示例可以参考samples/Gpio/src/Gpio_sample.c，基本使用逻辑为：

    /* 配置"PinIdx" PIN为GPIO功能 */
    RetVal = Port_SetGpioByIndex(PinIdx);

    /* 配置"PinIdx" PIN方向为 OUTPUT 并配置输出电平为Level */
    RetVal = Port_GpioDirectionOutput(PinIdx, Level);

    /* 配置"PinIdx" PIN方向为 INPUT */
    RetVal = Port_GpioDirectionInput(PinIdx);

    /* 读取"PinIdx" PIN的值 */
    RetVal = Port_GpioGetValue(PinIdx);

...

注意

• "Port_GpioGetValue"函数返回的值，在外部 PIN 脚悬空时，会受到 PinCtrl 的配置影响，从而读出来的值可能有变化；

• Port_Func 模块提供的 GPIO 接口，会对具体操作的 GPIO 进行检查，部分 PIN 不允许操作，具体请参考McalCdd/Port/src/Port_Func.c文件内的Gpio_Blacklist数组：

  const uint8_t Gpio_Blacklist[] = {
      0,  /* S100 Power related pins */
      5,  /* S100 debug uart tx */
      38, /* S100 Power related pins */
      15, /* S100 Power related pins */
      68, /* S100 Power related pins */
      69, /* S100 Power related pins */
      71, /* S100 Power related pins */
      80, /* S100 Power related pins */
      81, /* S100 Power related pins */
      82, /* S100 Power related pins */
      83, /* S100 Power related pins */
      AON_PIN_NUM(0),  /* S100 debug uart rx */
      AON_PIN_NUM(12), /* S100 Power related pins */
  };

  const uint8_t Gpio_Blacklist[] = {
      29, 16, 30, 31, 32,      /* V0P1 limit: SPI6 group */
      11, 16, 18, 34, 36,      /* debug/power related */
      67, 68,                  /* power related */
      46, 47,                  /* hsm uart rx/tx */
      54, 55, 56, 58, 59, 60, 61, 62, 63, 64, 65, 66,
      75, 76, 77, 78, 81,
      94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104,
      AON_PIN_NUM(0), AON_PIN_NUM(1), AON_PIN_NUM(2),
      AON_PIN_NUM(3), AON_PIN_NUM(4),
      AON_PIN_NUM(21), AON_PIN_NUM(22), AON_PIN_NUM(29),
      AON_PIN_NUM(35), AON_PIN_NUM(40), AON_PIN_NUM(41),
      AON_PIN_NUM(8),  /* sleep key pin */
      AON_PIN_NUM(25), /* debug uart rx */
  };